There are many ways through which you can check the pnr status of your Indian Railways ticket but i am going to mention some of the convenient methods:
1. PNR Enquiry Via SMS
Type PNR (your 10 digit pnr number) and send it to either 139 or 54959, 5676747, 57886. Example: PNR 2719239485.
2. PNR Enquiry Over Phone
Dial 139, follow the voice command and provide accurate information to know the current status of your Ticket.
2. PNR Enquiry Online
Go to the website by clicking the link, when reached there, enter your PNR Number in the given box and click on the "Get PNR Status" button. For your information let me tell you that this site does not ask to Fill captcha.
As a mechanical engineer, you are tasked with designing, creating, building and maintaining machines. Your field of expertise is wide ranging and ever expanding. This means that there is plenty to write about on your blog for both professionals and hobbyists alike.
Writing a blog can be one of the best ways to share information on your business or cause and engage with customers and supporters. However, sometimes it's hard to come up with ideas for blogs and things to write about. Here are some topics you might not have thought of that you could use for your next blog post:
#Blog Post Ideas
A taper turning is a type of woodworking lathe operation where the diameter of a piece being turned remains constant as it is rotated.
When you are familiar with autocad, it is a great design tool for creating floor plans. One of the best ways to get started with autocad is by practicing. In this article, we will share some free autocad exercises that you can practice on your own time.
The chassis of an automobile is the main structure of a motor vehicle. In an articulated vehicle, the body is attached to a separate frame called the "chassis". Depending on the type of vehicle, the chassis and body may be one piece (for example, cars and trucks), or there may be a "body-on-frame" design (ie, an independent body alongside a separate chassis).
Fluid mechanics is a branch of physics concerned with the behavior of fluids. Fluids are substances that appear to flow and conform to the shape of their container but retain a (nearly) constant volume independent of pressure.
The strength of materials is the study of how materials resist stress and strain. The strength of a material depends on its microstructure, composition, temperature, pressure and other factors. This page provides an introduction to the subject with links to more detailed information.
When you are using sand testing equipment, it must be properly calibrated to ensure that the results of your analysis are accurate. Calibration is important to reduce errors and improve accuracy.
Measurements will vary depending on the type of equipment used for analysis. For example, some types of equipment will need to undergo a full calibration while others may only require a partial calibration. It is also necessary when conducting any tests with new or refurbished equipment.
Conveyor transportation is a great option for transporting bulk material over long distances. However, conveyors also require special design considerations. In this series of blog posts we will take a look at the most common types of conveyors and their advantages and disadvantages. This first post looks at Screw Conveyor basics.
#Hashtags: #moodboards #branding
A chassis is the main supporting structure of a motor vehicle. In modern automobiles, the chassis consists of (in most cases) a combination of two parts: the body and the platform. The term body-on-frame is used to describe this architecture quite often because it includes all components, including the outer shell and all its parts, which make up what we call "the car", in contrast to platform frames, where only some (semi-permanent) structures are part of the actual
Propeller shafts are powertrain components that transfer rotational torque and thrust. They consist of a central hub, an outer shell and a set of bearings inside the shell.
The propeller shaft is the mechanical connection between the engine or motor and the propeller or rotor in a turboprop, turboshaft, helicopter, marine propulsion motor or other machine with such equipment. The transmission of rotation from one component to another is done by means of bearings
Torsion bar is a form of spring commonly used in car suspensions. It consists of a rod to which one end is anchored and the other is free to rotate. When no force or torque acts on the free end, it remains parallel with the stationary part and has no effect on the motion of the vehicle. However, when an external force is applied, such as turning a corner, for example, it rotates about its axis and twists. Since this action increases resistance to movement
The CIM (Customer Information Management) is a term that has been in existence for many years but it's gaining popularity in recent times. It is the process of collecting the data about your customers, collecting customer information and storing them in a system which can be used to determine their behavior patterns.
CIM helps businesses to understand what drives consumers to do certain things when they are interacting with various products or services.
It also enables businesses to improve the quality of their products or services, especially
The CIM (Customer Information Management) is a term that has been in existence for many years but it's gaining popularity in recent times. It is the process of collecting the data about your customers, collecting customer information and storing them in a system which can be used to determine their behavior patterns.
CIM helps businesses to understand what drives consumers to do certain things when they are interacting with various products or services.
It also enables businesses to improve the quality of their products or services, especially
A refrigerator is a home appliance that keeps food cold. It works by controlling the temperature inside to be slightly above the freezing point of water. The refrigerator can hold food for long periods without spoiling.
m
A sequential control system is a system in which conditional statements are used to determine the operation of the next component in a sequence. In this tutorial, we will study about sequential control systems and their applications in real life.
